|
|
|
|
Chevy 383 stroker motor
(350 block w/400 crankshaft and connecting rods)
Freshly ground crank w/ Speed pro bearings.
Also comes with correct harmonic balancer and flexplate.
New speedpro hypereutectic pistons and rings.
Isky Mega camshaft and lifters
Factory 441 heads with screw in studs installed.
Fresh performance valve job, seals, performance springs, etc.
Full roller (tip and fulcrum) aluminum rocker arms w/poly locks.
Pete Jackson noisy gear drive (can change out for a chain if customer prefers)
Edelbrock Performer intake.
Freshly machined 350 block w/4 bolt mains. Bored, honed, zero decked, brass front plugs, etc.
9.6:1 compression, will run on pump gas.
Completely new motor, break in time only. Ready to drop into your hot rod.
Can dyno motor for an extra $400
$3000
|
|
|
| |
|
|
Cylinder Heads:
|
|
|
Dart SS heads. Wissota approved Super Stock spec head.
Complete, NEW set, stainless 1.94/1.50 valves, PC seals, screw in studs and guideplates. Capable of
.600 lift. Performance valve job, and angle milled. Ready to bolt on and improve performance over the
other legal heads. Shipping available.
$1299
|
|
|
Vortec 350 cylinder heads. Stainless valves, performance valve job, new full length valve guides, screw
in studs, guide plates, performance valve springs, moly retainers and locks, PC seals.
Milled for flatness, ready to bolt on
$650
|
|
|
Vortec 305 Cylinder heads. Fresh valve job, new seals, milled for flatness and ready to assemble. $300
|
|
|
|
Various raw casting Chevy heads, 882, 441, 416, 624 etc. Call with your needs and we can build to suit
or magnaflux and sell raw castings.
|
|
|
| |
|
|
Engine Blocks:
|
|
|
4 Chevy 350 blocks. All two bolt mains.
2 one piece rear mains and 2 two piece rear main engines. Bored, honed, new frost plugs and cam
bearings. Block decked, cleaned and ready to assemble. $550/each
|
|
|
Chevy 305 bare block. Cleaned, magnufluxed, bored and honed .030" over. Cam bearings and frost
plugs installed. $350
|
|
|
Dart SHP block(s). 4.125 bore, clearanced for up to 3.75" stroke.350 mains. Splayed 4 bolt main
caps. Solid, race ready blocks with provisions for roller cam, knock sensors, etc.
$1498 plus freight
|
|
|
| |
|
|
Engine Parts:
|
|
|
Chevy 5.7" connecting rods (set of 8)
Cleaned, magnafluxed and big end resized.
$85 (2 sets available)
|
|
|
Chevy Powdered metal LT1 style connecting rods.
Magnafluxed and resized on big end. Press pin
$125
|
|
|
| |
|
|
Other, Misc:
|
|
|
CAM2 OIL
Blue Blood Racing Motor Oil - Synthetic Blend 20W-50
High Zinc levels for Excellent Anti-Wear Protection
Excellent oxidation stability in high performance engines
$6.20/qt
|
|
|
Engine lift plates, high quality, fits holley or rochester bolt patterns. Yellow zinc plated.
Compare to other mail order places @ $15+ each. $10
|
|
|
|
Mora Motorworks Chore Coat with embroidered logo
Corduroy collar
Heavyweight, sturdy zippers
Snapped, adjustable cuffs and waist
Adult sizes M, L, XL, 2XL
Available in brown only
$30
|
|
|
Mora Motorworks Hooded Fleece Coat with embroidered logo
Heavyweight cotton/polyester lining
2 exterior zippered pockets
Velcro adjustable cuffs
Adult sizes M, L, XL, 2XL
Available in black only
$25
|
|
|
Iron Cross long sleeve T-shirt design. Black t-shirt with white screen printing. Image on back with
smaller image on front.
$18 + $1 for each size over XL
|
|
|
|
| |
|
|
Send mail to info@moramotorworks.com with questions or comments about this web site.
Copyright © 2011 Mora Motorworks
|
|
|
|
