|
|
|
|
Listed below are consignment items that we currently have in the shop. Check this page regularly for updates as inventory changes frequently.
Shipping available for most items. If you have consignment items, they can be brought to the shop for display and listing here.
|
6" Scat rods for SBC 383
7/16 ARP cap screws, bushed pin end
NEW!
$303.50
|
|
|
492 camel back heads
Taken off Wissota super stock engine.
Screw in studs, guideplates, PC seals, performance
springs etc.
Angle milled with intake corrected.
$450
|
|
|
Harley Davidson Golf Cart
$1000
|
|
|
Speed pro pistons for 383 w/6" rod
(These will work perfectly with the scat rods listed
above!)
Small dome, .040" oversize
NEW
$330
|
|
|
Polished aluminum short water pump for SBC
NEW
$100
|
|
|
Chevy big block 049 casting core cylinder heads
$175
|
|
|
Chrome 8" SBC 400 CI fluid balancer
$75
|
|
|
Vortec truck exhaust manifolds for 350
Sandblasted and painted.
All studs are good
$125
|
|
|
Brodix Intake
HVH Single Plain Aluminum Intake
4150 Flange
$75
|
|
|
Hurst Indy 4-Speed Shifter
Includes linkage
New-never installed
$100
|
|
|
Pro Action SBC Iron Cylinder Heads
Screw in studs and guideplates
1.550 springs
235cc Intake Runner
2.08 intake valve-stainless
1.6 exhaust valve-stainless
64cc combustion chamber
$600/set
|
|
|
.060" Over 305 Block
Machined, ready to assemble
Comes with new Durabond cam bearings and frost
plugs installed
9.015" deck height
2 piece rear main seal
$500
|
|
|
.030" Over 305 Block
Machined, ready to assemble
Comes with new Durabond cam bearings and frost
plugs installed
Standard deck height
2 piece rear main seal
$400
|
|
|
.030" Over 350 Block
2 Bolt Main
Machined, ready to assemble
Comes with new Durabond cam bearings and frost
plugs installed
9.000" deck height
1 piece rear main seal
Roller cam compatible
Has mechanical fuel pump mount
$600
|
|
|
.040" Over 350 Block
2 Bolt Main
Machined, ready to assemble
Comes with new Durabond cam bearings and frost
plugs installed
9.000" deck height
2 piece rear main seal
$600
|
|
|
.060" Over 350 Block
2 Bolt Main
Machined, ready to assemble
Comes with new Durabond cam bearings and frost
plugs installed
Standard deck height
1 piece rear main seal
No fuel pump mount, but can be added
$400
|
|
|
Send mail to info@moramotorworks.com with questions or comments about this web site.
Copyright © 2011 Mora Motorworks
|
